LightingWill 10pcs/Pack Strip to Strip with Wire Solderless Snap Down 2Pin Conductor LED Strip Connector for 8mm Wide 3528 2835 Single Color Flex LED Strips
LightingWill—Professional LED Manufacture directly, customization accepted; Buy from professional, buy with confidence
Specifications:
* Strip to strip with wire LED strip connector to create a solder-free installation
* Used for connecting two SMD3528 2835 single color LED flex strip (8mm wide PCB, 2pin) for extrusion
* Color: white
* Clip Type: 2 pin 8mm
* Compatible with both waterproof and non-waterproof light strips
(Please peel off silicon on the surface around soldering line area when install waterproof strips)
Package includes:
* 10x 2 Pin 8mm connector for SMD3528 2835 LED strip lights
Installation: note that the positive and negative are connected correctly with PCB Board.
You may also interested
* 16.4ft CRI90 2835 300leds LED Strips,Please search B01JOF8BQG on Amazon
* 16.4ft CRI90 3528 300leds LED Strips,Please search B01DM9AWTO on Amazon
* 16.4ft CRI80 2835 300leds LED Strips,Please search B01K1SVXF6 on Amazon
* 16.4ft CRI80 3528 300leds LED Strips,Please search B01K1STWWC on Amazon
* 8.2ft CRI90 S-shape 2835 150leds LED Strips, Please search B01JOF8F30 on Amazon
* 4 pin 10mm SMD5050 RGB strip connectors, Please search B01DM7GXIA on Amazon
* 2 pin 10mm SMD5050 single color LED strip connectors, Please search B01DM7H5B4
Product Features
- 2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips)
- Working Condition: Can be able to stand up to 4A current and 0-24V voltage; Heat resistance level from -20 ~ 100 degree C.
- Strip to strip with 5.9inch wire in the middle, solderless quick snap down
- Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips )
- Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors; Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector
Loading...
Nice light quality – terrible build quality Pros:* Good light quality (I bought the 3000-3500K)* Nice small, strip (not bulky)Cons:* Very poor quality control (yes, 3 stars worth)* Very brittle – will likely snap along the cut points while you work with itDetails:The adhesive backing is worthless. What little there is is barely sticky and most of the strand was missing its paper backing that is supposed to prevent damage to the adhesive until its time to use. The backing strip is…
I found that these worked much better than the QIJIE connectors I used these connectors for my under cabinet project in the kitchen.I found that these worked much better than the QIJIE connectors.I used these for all my strip connections. I would cut and solder the wires where needed.Attached are pictures of how I used them. Slide the strip under the two plastic tabs, and then under the metal clamps.The only challenge is whether to peel the backing off the adhesive strip, or not. Later, I peeled before inserting, but then it is…
I’d recommend peeling back the adhesive (assuming you are using it) Getting the strip under the metal tabs was difficult until I realized there are plastic guides at the open end that hold the strip down. That meant the led strip has to be slid in from the end, even though the cap was open. After a few tries, I’d recommend peeling back the adhesive (assuming you are using it), tearing off the end, and reattaching it so that it will slide in instead of sticking. It’s also important to note that the connection is not secure until the clip is fastened closed on…