Broan S99020272 Fan Blade

Works well Needed a replacement fan for a Broan Model 403023 range hood and this fit perfectly. The motor shaft is splined with ridges and the blade is held on by friction (no nut or keeper on end of shaft). To replace you simply grab the old blade and pull it off the motor shaft then press the new blade onto the shaft. I found a little dish soap on the shaft and new blade helped to ease it into position as it is a little tough to press on. Once on I spun the blade by hand to make sure it was as straight…

This blade works great, I am very happy. When positioned as a replacement for a broken 9 inch blade (which seems to be the standard for small fans), this Broan is an inch or two smaller, which gives a comical look inside the cage. And versus the standard 9 inch, 3-prop blade, this replacement pushes less air. On my two speed RE brand fan, the high speed with this Broan propeller equals the low speed on my original 3 prop. But hey! That’s okay. I can say my fan is now noticeably quieter. And I am not going to chuck a perfectly good…

My Broan 42000 fan blade broke and all I needed was the blade.Tip: I removed the old blade by pulling it hard and it slid off (greasy). So I put some olive oil on a Q-Tip and greased the inside hole of blade and also the metal spindle. I have week hands, but I finally pushed it on. It works great. The way it’s shown in the picture, that is the side that faces up when you put it on.This is my first Review ever, I felt people had to know it worked for me. It turns the correct way for…