Nuvo Lighting TP147 Connector

Installation instructions incomplete I think many have had the same problem I did–the track heads do not light if you do not install them properly, and the installation instructions fail to tell you that you need to hold the slip collar back before you place the head into the slot and keep it retracted until you have twisted the head 90 degrees to lock it in place. This is not very easy to do because the slip collar is hard to hold out of the track. If you do not retract the head, it will not make full contact with the copper…

Quality inconsistencies Buyer be aware there may be a problem with this Live End cord. After installing it to my track it did not work. But when I turned it over, literally turning it upside down, the lights came on but only for a moment. I realized something was loose, making an intermittent connection. Luckily, this model comes with a removable cover, and I found that both incoming wires had not been properly attached to their respective screw posts. After re-installing the wires, the lights came on with no problem…